company news about Which tool is durable for cardboard carton equipment?

Which tool is durable for cardboard carton equipment? Recommended LLY PACK knives
LLY PACK
Often supply all kinds of knives for cardboard carton equipment, a cooperation, lifelong friends!

"The Analects of Confucius - Duke Ling of Wei": Zigong asked about benevolence. The Master said: "If a worker wants to be good at his work, he must first sharpen his tools. Living in this country, he should serve the wise men of his officials and befriend the benevolent people of his men." If a worker wants to be good at his work, he must first sharpen his tools." A craftsman wants to make his work well, but he must first sharpen his tools.
The high-speed cardboard production line has always been valued by the industry, and the slitting part of the thin knife is particularly important, and the application of the thin knife greatly improves the quality of the cardboard. Therefore, it is particularly important to select enough thin knives and their supporting consumables, which directly affect the quality and output of cardboard. The use of the slitting knife improves the quality of the cardboard on the tile line, so it is particularly important to purchase the thin knife and its supporting consumables grinding wheel.

LLY PACK produce all kinds of single-machine angle cutting knives, paper splitting knives, various slotting machine blades, Slotting Blade, Slitting Blade, spiral long knife, a wide variety, complete specifications, the production of ultra-thin corrugated paper trimming, splitting The round knife is made of high-quality steel, with good sharpness and wear resistance. Our company has provided supporting tools for many packaging machine design and manufacturing factories across the country, and the tools required by carton processing manufacturers all over the country are also provided by our company. Our company has been named "Contract-honoring and Promise-keeping" enterprise by the Municipal Administration for Industry and Commerce. Stress on quality, reputation first
One is our service purpose.
Shop

How to reasonably purchase thin cutting knives depends on the condition of your own equipment. For some old and old equipment, it is recommended to choose thin knives of sharp steel, because these equipments usually cannot meet the precision required by carbide blades. Low-speed wire machines (below 60 m/min) do not need to choose high-speed steel thin knives. Chrome steel thin knives also have better cost performance, and are more suitable for single-machine use with small workloads. For manufacturers with good equipment, of course, the use of carbide thin knives is the best choice. It has a long service life and short grinding time, which greatly reduces the number of downtimes and tool changes in the production process, saves time and trouble, and greatly reduces production costs.

working principle

The tool is just an accessory in the whole machine, but from the base paper to the corrugated cardboard and the processing into the carton are all cut by the tool, so how to choose the tool, the following aspects can be used for reference:
1. 9SiCr and SKDII can be used for slotting knives. The hardness of the former is HRC58Ο～60Ο, while the hardness of the latter is HRC61Ο～63Ο, but the wear resistance of the latter is higher than that of the former, and the service life is also several times longer. Of course, the price is also high. relatively high. When assembling the tool, the bushing between the upper and lower knives of the slotting knife must be well matched, and the tolerance fit clearance should be within 0.05mm. In addition, the smoothness and parallelism of the upper and lower knives, as well as the edge shape and tooth shape of the upper knives, have a certain relationship, otherwise the quality of the cut carton will be difficult to achieve the desired effect.
2. With the continuous updating of technology, the slitting thin knife has replaced the previous paper dividing knife. Thin slitting knives are generally made of the following materials, SKDII, W6Cr5Mo4V2 (high-speed steel) and tungsten alloy. Due to the high sand content of corrugated cardboard processed from domestic paper, it has a certain impact on the service life of the thin knife and the cutting quality of the paper. If you choose an alloy knife, it has high requirements in terms of price, quality and use. Its hardness is above HRC75Ο, and its service life is above 4 million meters. However, special attention should be paid to the installation of the knife. When installing the knife, you should not use too much force or stick to any dust. It is best to use paper pads on both sides of the blade to avoid direct metal contact and cause the knife to break. When using a thin knife, the angle of the cutting edge is better at 22Ο ~ 23Ο, and the thickness should be 1.2 ~ 1.5mm. Compared with the imported knife of 1mm, the thin knife has no effect on the quality of cardboard slitting. Knives made of SKDII are used for low-speed wire machines of 60 m/min, high-speed steel is used for medium-speed wire machines of 80-120 m/min, and tungsten steel is used for high-speed wires higher than 160 m/min. The wear resistance and heating degree of the three materials are different, and the grinding wheels are also different. SKDII and high-speed steel should use CBN grinding wheel, the formula of CBN grinding wheel is also different, tungsten alloy knife should be equipped with diamond grinding wheel, and it is best to set manual sharpening when using, so that the service life of the tool will be longer.
3. The Slitting Blade is generally an inlay structure. The blade body can be made of 45# steel or A3 material, while the blade is inlaid with 6CrW2Si and W18Cr4V (high speed steel). The blade angle should be between 38Ο and 48Ο. The knife must be straight and not twisted. The hardness of the former should be HRC58Ο~60Ο, the latter should be HRC62Ο~65Ο In short, carton factories should choose different types of knives according to their own equipment and quality requirements.